Bose vehicle swap.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Bishop_MPLS

TYF Newbie
Joined
Oct 4, 2013
Posts
6
Reaction score
0
So my '06 tahoe has the bose system in it, I want to remove it to install an aftermarket system. Can I completely remove the bose system and install it into my 2010 silverado and have it work in that truck? I poked around for awhile but couldn't find any help.
 

YukonXL04

The Riverboat
Supporting Member
Joined
Sep 3, 2013
Posts
2,489
Reaction score
175
Location
Arlington, TX
With lots of rewiring I believe it could work. I don't think it's worth all the extra work though
 

08grey

Full Access Member
Joined
Jun 17, 2012
Posts
4,596
Reaction score
725
It's not that bad. You will have to provide power and ground to the radio. Unplug the Bose amp. Then run the speaker wires either from radio or amp to the output wires from the Bose amp. And your done for the most part. You will need a good wire diagram.
 

YukonXL04

The Riverboat
Supporting Member
Joined
Sep 3, 2013
Posts
2,489
Reaction score
175
Location
Arlington, TX
Yea but all that rewiring for a crappy stock bose amp? Imo not worth it. Buy a cheapo 4ch and be better off
 

Forum statistics

Threads
133,482
Posts
1,886,150
Members
98,658
Latest member
jettawolfs
Top