cam position sensor

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mikeykey

Full Access Member
Joined
May 19, 2009
Posts
259
Reaction score
2
It's either under the distributor cap and rotor or near the front of the block on the bottom side.

cam shaft sensor and the crank shaft sensor always messes me up on the location. hope this helps...... I had to replace both of mine.
 

Whippled2dr

Stock
Joined
May 20, 2009
Posts
102
Reaction score
3
Location
SF Bay Area
Cam position sensor is located in the distributor. The one on the timing cover is the crank position sensor.
 

mikeykey

Full Access Member
Joined
May 19, 2009
Posts
259
Reaction score
2
of course thats all the way in the back how hard is it to change and how far down?

If your ref. to the cam sensor, just remove the dist cap and rotor, two screws and it comes right off.

If your ref. to the crank sensor, slide under your truck and in the front bottom side of your block, its held on by two screws.

Both very simple
 

Forum statistics

Threads
132,713
Posts
1,873,070
Members
97,537
Latest member
CHENTE

Latest posts

Top