Camera(s) and Parking sensors not working 2022 Yukon Denali

[salderson16]

Hello all.
I recently just purchased a '22 Yukon Denali and already having issues at 1900 miles. Most noticeable are the 360 cameras and the parking sensors. Neither button on the left button cluster will enable anything. Also, when I go in to Reverse, I get a camera icon with a slash thru it. The parking sensors never pick up any object, and the button on the left cluster will not turn on. Is it possible that these issues go hand in hand? And if so, what is the issue and resolution?

Thanks in advance.

 

[todayusay]

most late 2022 builds had a retrofit for parking sensors - meaning there was a line item on the window sticker with something like a $50 credit for those options not to work until GM "has the parts"

haven't heard about a retrofit for any cameras...I'd reset the infotainment and if that doesn't work...off to the dealer for warranty work

 

[01dailey]

Hello all.
I recently just purchased a '22 Yukon Denali and already having issues at 1900 miles. Most noticeable are the 360 cameras and the parking sensors. Neither button on the left button cluster will enable anything. Also, when I go in to Reverse, I get a camera icon with a slash thru it. The parking sensors never pick up any object, and the button on the left cluster will not turn on. Is it possible that these issues go hand in hand? And if so, what is the issue and resolution?

Thanks in advance.

Yesterday my 360° cameras stopped working on my 2021 Yukon Denali. Half an hour later I turned the ignition on and everything was fine. I think this had to do with an over the air firmware update. Once it completed the download, it just needed a reset which it got the next time I turned on the ignition. If it goes off again or becomes intermittent, I'll post an update.

Just another note. Since 2018 Federal Law requires all vehicles to have backup cameras. Certain vehicles may have omitted the 360° view due to chip shortage, but it should at least have the single backup camera or they probably couldn't sell the vehicle.

 

[salderson16]

Yesterday my 360° cameras stopped working on my 2021 Yukon Denali. Half an hour later I turned the ignition on and everything was fine. I think this had to do with an over the air firmware update. Once it completed the download, it just needed a reset which it got the next time I turned on the ignition. If it goes off again or becomes intermittent, I'll post an update.

Just another note. Since 2018 Federal Law requires all vehicles to have backup cameras. Certain vehicles may have omitted the 360° view due to chip shortage, but it should at least have the single backup camera or they probably couldn't sell the vehicle.

Thanks for the info! I am going to call my local GMC dealership and see if they can assist with resolving the issue(s). It sucks not having a camera and/or sensors to avoid curb rub, etc.

 

[salderson16]

Update:

Park Assist still does not work

However...
Backing out of my driveway this morning, and boom... my backup camera is suddenly working. Super odd. I wonder how long it's going to last.

 

[salderson16]

Update:

Park Assist still does not work

However...
Backing out of my driveway this morning, and boom... my backup camera is suddenly working. Super odd. I wonder how long it's going to last.

Back to Camera not working. So annyoing.