Climate Control LED Help

[YukonBrosef12]

Well guys I've run into yet another issue. I have decide to install LEDs in the Climate Control unit in the dash. I have tried this before and it was a fail that ended in me needing to replace the unit. I'm trying again but before I go at it, I'd like some help! When I tried taking apart the unit bits and pieces were flying and I was being somewhat impatient and well I don't know exactly how to take it apart. Any help is appreciated! Thanks on advance and this is the unit I have:

 

[Bomba02]

should be 7mm on the back and some tabs i think that need to be taken off and then some more to take boards apart or smaller can't remember if it doesn't fall apart theres something still holding it.
Billy

 

[YukonBrosef12]

should be 7mm on the back and some tabs i think that need to be taken off and then some more to take boards apart or smaller can't remember if it doesn't fall apart theres something still holding it.
Billy

Alright Billy thanks bro! I'll give it another try!

 

[RachelJWalker]

Go to you tube and look up circuit board medics they can help

 

[Aaron_L]

Pull the knobs off before you try to take the face off the box. There is a smaller board that is screwed into the face for the buttons across the bottom, and wiring connecting it to the main board. The main board has some tabs holding it in the box.