Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
First: Welcome to the forum from Oregon.
I would be checking the leaf spring bushings and mounts and shock mounts.
Also, check the centering pin where the axle mounts at the spring perches.
I replaced the whole suspention, new leaf springs shocks front and rear, control arms as well as all new steering components.First: Welcome to the forum from Oregon.
I would be checking the leaf spring bushings and mounts and shock mounts.
Also, check the centering pin where the axle mounts at the spring perches.
No I will check that next,Did you replace the pinion bearing?
The the locker meshed well and the ring and piñon were in good shape. I will remove drive shaft and check for play tha Weekend.How much play in rear yoke when driveshaft removed? Did the locker pattern well when Dychemed?
I replaced the whole suspention, new leaf springs shocks front and rear, control arms as well as all new steering components.