Confused about efan install with harness

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

yukonjacks

A Vegitative State
Joined
May 2, 2009
Posts
428
Reaction score
2
Location
The Confluence
I am ready to install Blackbears harness and the directions say to punch out the BLUE 42 Pin. There is no pin in #42 and it says green 33. What do I put in the 33??
 

WoldD90

Off Road Addict
Joined
Jun 14, 2009
Posts
230
Reaction score
2
Location
Atlanta, GA
Post a picture of the set up. I installed electric fans a year or so ago. The green wire is for the AC over-ride. Not sure about the other.
 

Grocery Getter

A guy with a truck.
Joined
May 2, 2009
Posts
745
Reaction score
13
Location
Phoenix, Az
Did you get it? There are two wires(PINS) on the harness and two halves of the PCM blue/green. IIRC one pin goes to each side, for me the biggest ***** was getting the PINS through the holes....... You just need to push the wires through the right numbered/colored holes..... It's 6:30 so Im sure you figured it out by now....

I actually broke one of the tips off and had to get a new one from the dealership..... PITA.
 

Forum statistics

Threads
133,269
Posts
1,882,500
Members
98,312
Latest member
kieranblevans
Top