denali center console trim - whats the deal?

[ScottyBoy]

Yeah ill snap a pic of what I have done so far in the morning. So far I have the two lids over the storage. Haven't had time to take the 's changer cover off and custom cut the slots for the 's changer and storage. That one will be a pain to do.

That's fine. I mainly would like to just see how that ebony woodgrain vynil looks with the Denali black cherrywood.

 

[TheAutumnWind]

i'VE got some wear also. Ill have to check out that sem paint.

 

[adventurenali92]

@ScottyBoy I can't remeber exactly what the color is called. But it's aprettyclose match to the denali wood. I realized the lines on the small lid are going the wrong way from the other lid. So I will redo it. Just haven't had time haha. But I'm happy with the product and look. Here's a before and after shot.

 

[pnwdan]

This is the Remin kit you can buy off of Carid.com

 

[Rocket Man]

Here ya go.. I found the thread. I used it before installing my dash kit. Looks great
http://www.tahoeyukonforum.com/threads/dashtop-and-dash-console-trim-paint-denali.49129/page-2

I updated that thread just now. It looks like the SEM paint is what matches but I found the Dupli-Color Dark Shadow Gray is actually the right one for the center parts of the console. SEM makes one that matches the dash cover and other pieces. It's the one shown on page 2 of that thread, Dupli-Color BFM0360. Here's a close-up of mine repainted. It's a cheap alternative to the Remin kits, but it takes a bit of work. I used Scotchbrite pads and denatured alcohol and the old stuff came right off. It's been over a year and it still looks new. (yes there's a couple loose hairs in the picture but they're not stuck in the paint I swear!)

 

[pnwdan]

The label posted with the name and part number is the duplicolor

 

[TheAutumnWind]

I updated that thread just now. It looks like the SEM paint is what matches but I found the Dupli-Color Dark Shadow Gray is actually the right one for the center parts of the console. SEM makes one that matches the dash cover and other pieces. It's the one shown on page 2 of that thread, Dupli-Color BFM0360. Here's a close-up of mine repainted. It's a cheap alternative to the Remin kits, but it takes a bit of work. I used Scotchbrite pads and denatured alcohol and the old stuff came right off. It's been over a yearView attachment 63348 and it still looks new. (yes there's a couple loose hairs in the picture but they're not stuck in the paint I swear!)

that really looks great

 

[ScottyBoy]

I updated that thread just now. It looks like the SEM paint is what matches but I found the Dupli-Color Dark Shadow Gray is actually the right one for the center parts of the console. SEM makes one that matches the dash cover and other pieces. It's the one shown on page 2 of that thread, Dupli-Color BFM0360. Here's a close-up of mine repainted. It's a cheap alternative to the Remin kits, but it takes a bit of work. I used Scotchbrite pads and denatured alcohol and the old stuff came right off. It's been over a yearView attachment 63348 and it still looks new. (yes there's a couple loose hairs in the picture but they're not stuck in the paint I swear!)

Is that just the paint? Or did you lay some flat/matte/satin clear coat over it?

 

[Rocket Man]

Is that just the paint? Or did you lay some flat/matte/satin clear coat over it?

That's just the Dupli-Color paint with no clear. It lay s on amazingly nice. I did the console and the dash bezel. Here's a shot of the dash.

 

[ScottyBoy]

Ok now I'm sold. That looks awesome! I lime that Remin wood kit from CarID posted above, but that cost over $200!!!
For under $10 a can of this gray Dupli Color paint looks great. I think that's the best bang for your buck. And I don't have many bucks laying around, so I need to do this as cheaply as possible.