Denali chrome moldings

[tweak08]

im new and i have been looking everywhere in these threads but havent found any or maybe not looking in the right place, but i want to get the little chrome pieces the go on the molding, the steps and the rear light the denali has. if any one could help find them, or point me in the right direction, i would greatly appreciate it. thanks

 

[soulsea]

Hi there,

The chrome cannot be gotten separately from the moldings ... they come as two interlocking pieces and the top part has to be painted to match the truck. These are the part numbers for the current (thinner) Denali/LTZ moldings:

When you say the 'steps' you mean running boards or the step bad on the back bumper?

If it's running boards then that chrome trim too cannot be added to the base running boards, you have to get the Denali/Escalade boards assembly.

What rear light are you referring to?

 

[tweak08]

im sorry i dont know why it added light i meant the rear chrome part under the rear door i am guessing i would have to buy all of that part to. would u have an idea of how much it would all cost me, and i am also looking at getting the esky mirrors and the chrome handles. i love your truck i already got the 3rd brake light but im looking to put the extra little things to complete it.

 

[soulsea]

Yeah, unfortunately the rear bumper step pad will not fit the base Yukon bumper properly, it will stick out about an inch. So for it to look right you have to replace the whole rear bumper assembly which is the bumper cover + step pad + chrome trim + hitch cover. It's not cheap, but if you're patient and wait for deals here, on ebay, and craigslist you can accumulate all the parts for around $500 and then have them painted. The actual bumper swap takes no more than half an hour.

OEM chrome handles you can get as a package for around $100 but it can get a little pricey to have them installed ... but if you're good with your hands there's a tutorial I can link you to where it shows you how to take off the door panels to do the switch.

Escalade mirrors in good condition run around $300 a set depending on which version. If you're going to change the handles it's advisable to have both done at the same time so that you don't have to have the door panels taken off twice.

The door trim is also rather pricey at the dealer and again you have to have those painted. Sometimes they become available here when folks demold their trucks, and I hear a place called Nordstrom Auto sometimes have them at a good price.

Hope that helps a little.

Let's see you truck Steve.

 

[Regency]

Yeahh nordstroms is amazing getting my stuff from there at 30 bucks a door and getting my running boards from there

 

[tweak08]

thanks for the help, here are some picks of my truck, let me know what you all think and what i can do to improve it.

 

[Regency]

Lower grille to match or denali grille
Esky tails
esky bumper
esky running boards
denali moldings
Denali roof rack
Rims?
Smoke the side marker
Smoke the tails

 

[tweak08]

im looking into getting the projectors u got they look nice and maybe putting in the esky taillight too and rims i really want the concept24 from marcellino, but just a matter of time.

 

[Regency]

im looking into getting the projectors u got they look nice and maybe putting in the esky taillight too and rims i really want the concept24 from marcellino, but just a matter of time.

Thanks man but only get them if you know they don't improve the light output but I do love all the leds

 

[soulsea]

Steve, I like the esky third ... btw, my tails from my sig pic are in the 'for sale' section to match that esky 3rd of yours.

And yes, please be careful with aftermarket headlamps ... although they may improve the look of the truck, visibility is often below par.