Disabling stock sub in Tahoe

[Nickleahy23]

Well i have my system in the tahoe as most know, but the damn stock sub still works..it makes it sound ****** when you have the rear hatch open and its partially blown..what do i do to unhook it, besides taking the back apart to get to it..thanks

 

[Max]

Just pull it apart and cut the wire, I'm not sure if you can pull any fuse since it's tied into a larger amplifier iirc. I'm sure JK would know. Honestly it will only take a few minutes to pull apart, then just cut that shit with a pair of dykes and call it a day. My other speakers sounded better after cutting mine, way less current draw with the ****** stock sub.

 

[Nickleahy23]

Just pull it apart and cut the wire, I'm not sure if you can pull any fuse since it's tied into a larger amplifier iirc. I'm sure JK would know. Honestly it will only take a few minutes to pull apart, then just cut that shit with a pair of dykes and call it a day. My other speakers sounded better after cutting mine, way less current draw with the ****** stock sub.

my box is a ***** to get in and out by myself lol..its so wedged in there..

 

[Jamison]

I pulled apart the plastics where the sub is mounted and unplugged the red/black wiring harness and it turned it off. I had to disable mine after I installed my Pioneer indash b/c it was over pushing the sub and causing it to distort.

 

[05Yukon]

Pull the head unit then and cut it there

 

[NathanJax]

I pulled apart the plastics where the sub is mounted and unplugged the red/black wiring harness and it turned it off.

+1

That's what I did in my old tahoe...

 

[UWMlax15]

I replaced mine with an aftermarket sub and the sound quality shot way up.

 

[DarkTahoe00]

I replaced mine with an aftermarket sub and the sound quality shot way up.

Thats what I did too! Pretty much got the same results!