DJM endlinks

[smhainww]

Does anyone have a pic of under your veh where you had to move and drill new hole for the d-bushing on driver side. Thanks

 

[foxtrot moon]

I installed a McGaughey kit recently and didn't have to drill any holes. Is the sway bar hitting the pumpkin? Because in my other thread, that's what someone said that bit of instruction was for:

http://www.tahoeyukonforum.com/forum/showthread.php?t=66039

 

[smhainww]

Thanks foxtrot for the reply. I haven't done the free travel
mod yet or put my rear links on yet it's been cold here past few days hopefully tomorrow.

 

[fiatdale]

I just did this last week. Ill snap some pics today. Basically drilled new holes about 1" to the right of the old holes. Make sure you feel on top of the bracket where it will be so you can still get a nut in there. Mine didn't hit the rear end, it hit the panhard bar on the passenger side. Problem solved with these links and holy shit, what a difference.

 

[NORCAL SS]

page 2 shows it all
http://djmsuspension.com/wp-content/uploads/2012/01/RK2000.pdf

 

[smhainww]

Thanks guys yea I put them on mine was hitting on the left side as well. Started on the free travel mod as well.