Door side moldings

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

esoxjohn

TYF Newbie
Joined
Feb 5, 2013
Posts
1
Reaction score
0
I purchased a 2007 Tahoe in 2011. I had the door side moldings replaced because they were coming off the door. Now the same thing is happening. They are coming away from the door and bending out. What to do?

Thanks John
 

cjlaw73

Member
Joined
May 31, 2012
Posts
78
Reaction score
13
Location
Medford, NJ
Curious to hear too. Bringing my 09 in next week to get them replaced under the warranty, but figured it will happen again. Wondering if any one just removes them as I see some do with the BSMs on C5 Vettes.
 

fiatdale

Houstons Best
Joined
Jan 3, 2012
Posts
3,890
Reaction score
811
Location
Houston
Sounds like the tape just isnt holding. I know we had a bunch come in to our body shop all at once where they were manufactured wrong. Where the tape sat on the back was set in too far and didnt make enough contact to hold on to the door.
 

KMeloney

Full Access Member
Joined
May 2, 2009
Posts
3,003
Reaction score
374
Curious to hear too. Bringing my 09 in next week to get them replaced under the warranty, but figured it will happen again. Wondering if any one just removes them as I see some do with the BSMs on C5 Vettes.

Don't wonder -- just look around here some. LOTS of folks ditch the BSMs like they do on C5s.

I ditched the moldings on my '01 Z06, but kept them on my '09 Tahoe (I like the chrome on the Tahoe).

The Tahoe moldings come off the same way, btw.
 

Goodinblack

I Like Tacos
Supporting Member
Joined
Oct 27, 2011
Posts
22,295
Reaction score
3,043
Location
Dirty South
Leave them off.

Mine are on tight.

If they were coming off though....... I would rake them off and leave them off.
 

YuCanada

Full Access Member
Joined
Sep 25, 2012
Posts
1,431
Reaction score
495
Location
Nunavut, Canada
I'd just leave them off. It looks a lot cleaner on any I've seen with them off and on other than the Escalade/LTZ moldings.

du4anymu.jpg
 

DUSTY

TYF Newbie
Joined
Aug 3, 2014
Posts
1
Reaction score
0
Door Moldings

I have a 09 Tahoe I bought new. The molding was peeling from the door then. Of course I identified that during the inspection. long story short and 2 moldings down the road it was replaced. the dealer ordered another, but it was put on at a body up the street from the dealership. This molding is holding up and 5 yrs later this molding still looks brand new and has not peeled at all. But the paint has faded on the other 3 orginal moldings and they are peeling. I have contacted Chevrolet and of course to replace is on me. I asked if this was happening to other tahoe's. I was told no, not to their knowledge
 

07Burb

GM fan for life
Staff member
Administrator
Supporting Member
Joined
Jan 3, 2011
Posts
50,452
Reaction score
17,567
Either use the red 3m tape to put them back on or take them off
 

Forum statistics

Threads
133,364
Posts
1,884,291
Members
98,479
Latest member
Soccerdad

Latest posts

Top