First Mod!!!

[dcarver]

Thanks to y'all at the forum, I've done my first mod. 6Hi w/DRLs.
It was stupid easy thanks to the tech right up.
Keeping it on the cheap side until the tax refund comes in and I'm keeping it under the radar from the wife.


sorry about the glare. I just found that my phone has a damn crack on the lens somehow

 

[chef choy]

I tried doing mine, but had a hell-of-a-time getting the wire in there and plugging the relay in there as well. Any tricks?

 

[dcarver]

well all diode wires go into the bottom right slot of the High beams. So with all of the lights hooked up there are 4 diodes going into that one slot. You've really just gotta shove that fuse back in. Mine doesn't look like its all the way down but it is in there. Also do the DRLs last and put the diode into the back right slot of that fuse, plug the DRL fuse back in, then run the other end of the diode to the high beam slot (it may just barely reach) then shove it down.
Also, don't know if you've seen it, but there is a small gray band that goes around the barrel of the diode. Make sure all of the diodes have that gray band pointing towards the High beam fuse.
Hope this helps. Took me a couple of tries to get it just right