Flip the pill vs. tap and plug?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

RLC2020

Member
Joined
Oct 6, 2021
Posts
66
Reaction score
65
I'm doing a full service on my trans this weekend. Amsoil fluid, new filter, and I'm either going to "flip the pill" or tap and plug the thermostat housing. Not sure what method would be best honestly. I can't do the newly release thermostat replacement because I have a 2015 with the clip style cooler lines, so I either need to flip or plug my existing housing.

I live in Florida and it never goes below freezing where I am, I do tow regularly, but nothing over 4k lbs 99% of the time. Is flipping the pill going to do what I need, or should I take the extra steps to tap the housing and install a plug?

TYIA for any input.
 
OP
OP
RLC2020

RLC2020

Member
Joined
Oct 6, 2021
Posts
66
Reaction score
65
I ended up just flipping the pill. Turns out that my 2015 actually has the bolt on style lines instead of the older clip style. I may buy the newer style thermostat housing down the road, but for now it's running much cooler. Didn't go over 135 on my way to work this morning!
 

Tk59194

Full Access Member
Joined
Dec 29, 2017
Posts
345
Reaction score
338
As an alternate route: 6L80/6L90/8L90 Sure-Cool System

 

SpineDock

Member
Joined
Dec 14, 2022
Posts
53
Reaction score
63
Location
Clearwater
Flipped mine. Didn't get past 172 towing enclosed 4600 pounds. Stays around 120-130 cruising around town. I would see 195-200 easily around town not towing before I flipped it.
I would love to do this (new Tahoe owner here!!) but would like to watch a video or read a detailed thread if possible.
Anything out there like this?
 
Top