For all you with ddm tuning hids

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

1sikyukon

Full Access Member
Joined
May 5, 2009
Posts
474
Reaction score
2
Location
SFV, CA
Does anyone know or has anyone purchased an ACTUAL 5202 BULB HID KIT from them? Or do they just say they have a 5202 kit and send u a similar bulb that u need to silicone in place. ALSO are you happy with their products?
 

williajj

Full Access Member
Joined
May 5, 2009
Posts
106
Reaction score
0
Location
Minnesota
I ordered the 5202 from DDM and so far no complaints. The notches on the connectors are pretty flimsy, so be careful when installing as I did snap one off. Just be careful and don't force it if they don't go in right away. You shouldn't need to silicon anything and I have not noticed any condensation in the housing so the seal must be pretty good.
 

Zed 71

Full Access Member
Joined
Sep 30, 2009
Posts
1,229
Reaction score
12
Location
Pacific NW
I have installed three DDM kits on three seperate cars. No problems and IMO the kits are good especially for the price. The oldest kit has been on for four years with no problems.

Looks like you are installing in the fogs right?
 
OP
OP
1

1sikyukon

Full Access Member
Joined
May 5, 2009
Posts
474
Reaction score
2
Location
SFV, CA
Yes I had a kit in my fogs for 6 months now, but like an idiot I didnt strap the ballast the way I should of and 6 months into them being in the ballast got loose and yanked out the bulb and all the wiring while i was driving. so I now need to replace the kit.
 

Zed 71

Full Access Member
Joined
Sep 30, 2009
Posts
1,229
Reaction score
12
Location
Pacific NW
Geez I think I just jinxed myself... The drivers side HID on the Tahoe started to flicker :(. FYI, I had this kit on for almost a year and a half; I guess I will check the connections and maybe look at adding the relay.
 
Last edited:

Modded

That Guy
Joined
May 3, 2009
Posts
6,942
Reaction score
108
You don't really need to, just have to access the wires to the HID bulbs.
 
Top