Full Tune up for the HOE

[XxBIGxTEXxX]

So havent posted anything lately and dont know if this post should be posted on here of on the performance discussion.. Anyways, I want more power coming out of my rig. Im looking into installing the MSD complete tune up, WHat are all the parts that i need to get? Also, how much power would i get out of her if i put in the MSD Digital 6AL Ignition Control?

 

[IRQVET]

I was running an MDS on another vehicle, and it really didn't make any difference in power. I know some people swear by them, but I wasn't all that impressed. I would rather see you put on a few more bumper stickers, you know you get 10hp per sticker, lol.

Just my .02 cents

 

[SunlitComet]

cap, rotor, wires, coil, ignition box, wire separators. and some new pluggies.

 

[XxBIGxTEXxX]

So the MSD ignition with full tune up is not that much help full on power? Then i should do a regular tune up and just buy a yank converter instead for more power gain?

 

[IRQVET]

Alright, in all seriousness, this is what I would suggest you do:

New Plugs (Can't go wrong with Bosch) with wire separators
New Wires (Bigger Diameter than Stock)
New Cap/ Rotor

By doing this your NOT going to pull the front wheels off the ground, but you will notice a slight increase in power and it will be noticeable.

Good luck !!!