Getting my rear lower on 2004 Yukon SLT

[lowkon_kelo]

i just got my yukon lowered and the front looks really good but it just seems like the back isn’t as low as i want it. I got a 4-5/6 drop. it looks level but it just doesn’t look low enough. any help?

 

[Big Mama]

A little more info please. How was the back lowered? How long ago was it done? How much lower did you want it? Do you still have the same wheel/tire combo? Did the ‘04 come with auto leveling?

 

[strutaeng]

Are there no shorter rear springs for these trucks?

I think some guys on the Silverados will just cut down the coil springs to lower the fronts:

how to cut coils... pics inside... - PerformanceTrucks.net Forums

GM Drivetrain & Suspension - how to cut coils... pics inside... - this is a step by step of how to cut your coils to drop your nbs silverado. feel free to add in anything i missed before 53252 1st jack the truck up by the frame and have another jack you can put under the lower control arm to...

www.performancetrucks.net

I wonder if you can do the same to the rear coils on these trucks?

 

[MarKist]

I got Belltech rear springs on mine.5/7

 

[lowkon_kelo]

A little more info please. How was the back lowered? How long ago was it done? How much lower did you want it? Do you still have the same wheel/tire combo? Did the ‘04 come with auto leveling?

6 inch drop springs Springs, drop shocks, free travel mod. was done about a month ago. I do still have the same wheel tire combo but have some 275/45/20 i’m about to put on. And i’m not 100% sure about auto leveling but i’m pretty sure no.

 

[Goliath23]

6 inch drop springs Springs, drop shocks, free travel mod. was done about a month ago. I do still have the same wheel tire combo but have some 275/45/20 i’m about to put on. And i’m not 100% sure about auto leveling but i’m pretty sure no.

Yeah yours does sit a bit higher in the rear. Did you do all the factory relocation brackets?

 

[lowkon_kelo]

Yeah yours does sit a bit higher in the rear. Did you do all the factory relocation brackets?

i just took my sway bar out until the new sway bar relocation kit comes in. it was hitting on the panhard bar but still sits higher in the rear, i even got 6inch c10 drop springs (8 inch drop on tahoe) and it sits the exact same.