Grille removal schematic

[whoseanthony]

I just got my dDenali grille in (finally) from gmpd and want to attempt to install myself i have been unable to find the schematics anywhere or any guide for that matter. Anyone have some info? Thanks!

 

[MELLOWYELLOW06]

Yes please. I would love them as well.
Our 2 grills are coming in on Monday
and I really want to slap them on.
I can't imagine it being very hard but
it really is comforting when you have a guide.

 

[whoseanthony]

Found a great guide!!! Gonna try today or tomorrow.

http://sleekautoaccessories.com/v/trexinstructions/Instructions 671169X.pdf


Sent from my iPhone using Tapatalk

 

[theblackfalcon]

I did it yesterday with no schematic. I took about 45 minutes. I did it without fully removing the grill as photo. Remove the upper cover under hood and rubber weather stripping etc. This gives you access to the top of grill etc. You can then remove the screws holding it in place. I drilled out the one rivet style connector and then put a new rivet in after I re-installed. In each wheel well crank the wheel in a direction and remove the bolts holding the wheel well splash guard etc. in place. From there you can very, very carefully pull the bumper cover all the way off and work the grill out of place.

 

[MELLOWYELLOW06]

Wow
I didn't think it would be this involved!

So you do have to pull bumper off or not necessary?

 

[hosseface]

Wow
I didn't think it would be this involved!

So you do have to pull bumper off or not necessary?

Everything I have seen says yes.

 

[MELLOWYELLOW06]

I did it yesterday with no schematic. I took about 45 minutes

From there you can very, very carefully pull the bumper cover all the way off and work the grill out of place.

So you did take off the bumper completely or just pulled out of the way? I just don't want to remove bumper because i have the active cruise control and the parking sensor wires Abd dint want to screw it up.