Has any1 used this amp??

[2003 Z71]

its an autotek amp. monoblock. i have 2 kicker 15" L7's in a ported box. i was told to grab an autotek bass thrust or somethig along those lines? how are they? reliablity? will they push L7's better than the amp in my sig? thanks

 

[dznutts]

What type is it? Is it a (AT 1000 or AT 1500?). I have a Autotek AT 1500 and it pounds like hail with 0 Gauge monster wire to (2) RE 12" ported boxes and Big 3 upgrade.

****OLD PICTURE. I PURCHASED AT 1000 FIRST, THEN UPGRADED TO AT 1500. REPLACED PYLE BS WITH AUTOTEK AT 1500***

You need at lease 4 gauge wire to power. Higher the better. I like mine.
RMS 375 WATTS X 2 CHANNELS @ 4 OHMS
RMS 750 WATTS X 2 CHANNELS @ 2 OHMS
RMS 1500 WATTS X 1 CHANNELS @ 4 OHMS (BRIDGED)

AUTOTEK AT 1500 ($85.00) AT VMINNOVATIONS.COM

 

[blueflamed03]

IMHO, keep the ZX15001,

 

[txsmainevent]

I have a Hifonics Brutus BXI2006 on 2 L7 15''s. That shit hit hard.....I also had it on 4 kicker CVR 15''s and it was ridiculous....You can get them for like 3 and i think they are worth it......

 

[2003 Z71]

What type is it? Is it a (AT 1000 or AT 1500?). I have a Autotek AT 1500 and it pounds like hail with 0 Gauge monster wire to (2) RE 12" ported boxes and Big 3 upgrade.

****OLD PICTURE. I PURCHASED AT 1000 FIRST, THEN UPGRADED TO AT 1500. REPLACED PYLE BS WITH AUTOTEK AT 1500***

You need at lease 4 gauge wire to power. Higher the better. I like mine.
RMS 375 WATTS X 2 CHANNELS @ 4 OHMS
RMS 750 WATTS X 2 CHANNELS @ 2 OHMS
RMS 1500 WATTS X 1 CHANNELS @ 4 OHMS (BRIDGED)

AUTOTEK AT 1500 ($85.00) AT VMINNOVATIONS.COM

honestly i have no clue it looks like an old one its (Bass thrust series(BTS7600?) my cousin gave it to me. i hooked it up to my kickers and it hits but i think im gonna keep my kicker amp and hold this 1 on the side just in case. i have 0 guage ran thru the truck so as far as the wire goes im good.

---------- Post added at 02:35 AM ---------- Previous post was at 02:33 AM ----------

IMHO, keep the ZX15001,

i am after my cousin told me to grab the autotek he gave me his i tried it, it does hit hard but my kicker hits harder so im gonna keep the autotek as a spare

---------- Post added at 02:36 AM ---------- Previous post was at 02:35 AM ----------

I have a Hifonics Brutus BXI2006 on 2 L7 15''s. That shit hit hard.....I also had it on 4 kicker CVR 15''s and it was ridiculous....You can get them for like 3 and i think they are worth it......

hifonics and autotek r the same thing??

 

[blueflamed03]

hifonics and auto are made by the same company.
Maxxsonics.

 

[2003 Z71]

oh ok

 

[BabyHuey]

Hifonics gear is pretty nice, in most cases the power is overrated by a bit

 

[blueflamed03]

Hifonics gear is pretty nice, in most cases the power is overrated by a bit

overrated, as in it doesnt DO the power they state, or under rated, meaning it does MORE than rated?

Just clarifying

 

[droppedHoe]

i have an awesome autotek, but it has a few blown mosfets. MM4000.1, i miss that amp. had it in my 04 maxima with 2 audiobahn awt12x's...loved it.. i fuc*ed the amp up trying to run it at 16v when a friend was competing in daytona.

it was benched 3 different times all over 3800rms.
14.4 with a 2.6ohm load it was benched at 4286.
those were the good ole days when it comes to autotek, now they're falling off imo
great amp i bought off termpro YEARS ago. i should get it fixed but ima run a sundown 4500 in my new truck for my subs now that i fell in love with my sundown 200.4.

hey tracy, what the going price on a warhorse? b/c there's one on caco for $1000 right now. dont think its been used and that $180 LESS than the used sundown 4500 i plan on grabbing... not like i need 10,000rms but i do want at least 5000 and the sundown is right there at 4800rms