Help! 2/3 drop riding rough

[redeknightjr]

I'm hoping someone can help me! My current set up is:
2" spindle drop
New hubs
New stock U&L front CA'S
New front stock jounces
Tony's 5305 +1 rear springs
Bistein 4600 all 4 corners (2 months old)
Rear bump mod (cut mount)
Djm rear end links
Rear sway shifted over
I have played with the tbar keys up and down
285/45/22 bridgestone dualers

 

[Kartoon]

I actually just installed the same kit basically, and mine rides pretty rough also. Enough to make me think of putting the stock stuff back on. I was thinking maybe my autoride shocks are giving it a bad ride because I have no idea if they work. The ride was awesome before the lowering kit though.

I put Eibach sway bars front and rear on, and the rear is hitting the right shock, and it seems to be hitting the panhard bar also. I took it off until I can figure it out. But maybe check out if anything like that is hitting on yours.

 

[08grey]

Allot of people end up not using the blistering shocks because of how stiff they are.

 

[redeknightjr]

Thanks Kartoon....ive checked several times also and cant figure it out also.

---------- Post added at 01:47 PM ---------- Previous post was at 01:43 PM ----------

08grey....i had the beltech sp's on it and thought maybe it was the shocks, then i put on the bilstein s thinking they would be better due to some others set ups.....i dont know im kinda at a loss....any suggestions?

 

[redemn93]

my rear sp rode like a tank for the first few weeks. they sofended up a little after that though and are acceptable to me. my springs, 5303, are a little stiffer than yours too i think. i have a set of bilsteins that are much softer than the SP i would sell for a decent price if you're interested.