Help with my drop trying to get the rear lower?

[torwanwilliams.tw]

https://goo.gl/photos/VJoLseULties4g2f6

Sent from my SPH-L710 using Tapatalk

 

[NathanJax]

do you have shock relocators in the rear? That could help. If not, go with a 1" smaller spring...

 

[torwanwilliams.tw]

Yeah but it's still sits kinda high

Sent from my SPH-L710 using Tapatalk

 

[NathanJax]

Yeah but it's still sits kinda high

Sent from my SPH-L710 using Tapatalk

Then you'll have to do smaller springs. If those are a 4", you'll need a 5" and maybe grab some 1/2" spacers so you can adjust it to be level side to side and with the front.

 

[torwanwilliams.tw]

Question can I cut a coil off? Not sure

Sent from my SPH-L710 using Tapatalk

 

[NathanJax]

Question can I cut a coil off? Not sure

Sent from my SPH-L710 using Tapatalk

could you? yes, would I? No.

It could effect the spring rate which in turn would affect ride quality. IF you do, cut from the top, not the bottom.


I'd spend the $200ish and get new springs

 

[torwanwilliams.tw]

Ok that's good to know I'll get some springs I'm doing it myself so I know I'll make sum mistakes.

Sent from my SPH-L710 using Tapatalk

 

[NORCAL SS]

What springs are you using?

 

[torwanwilliams.tw]

Crown suspension 4"drop coils are you the man everyone talks about and if so what do I need to do next? I know I need to cut the bump stops bracket off. But like I said I'm not a experience and do you sell parts?

Sent from my SPH-L710 using Tapatalk

 

[NORCAL SS]

Good luck with crown.

1) do you have shock extenders?
2) what rear shocks are you running?
3),non autoride truck right?

Tell me that and I can dial in a price and kit for you