how to remove spark plug wires

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Sasquatch

Full Access Member
Joined
May 3, 2009
Posts
1,249
Reaction score
388
Location
Orange County N.Y.
Pulling them is the right way to remove them but as you may know that does not always work because the boots get stuck to the plugs and in most cases you have to destroy the wires to get them off.

Mine were stuck so i just pulled the wire out of the boot and then grabbed the boot with pliers and finally got them off. If you`re not replacing the wires and don`t want to ruin them try pulling and twisting at the same time.
 

undy

Full Access Member
Joined
May 13, 2013
Posts
240
Reaction score
430
Location
Virginia and Florida
Grab the boot, twist it 90 degrees and then pull. That should loosen the boot and prevent tearing and separation.
 

Physh1

Full Access Member
Joined
Jul 29, 2010
Posts
773
Reaction score
24
Grab the boot, twist it 90 degrees and then pull. That should loosen the boot and prevent tearing and separation.
This...

I've also just grabbed the boot & moved it around before I pulled. You'll feel the boot loosen & unstick from the plug.

Cameron
 

Fardoche

TYF Newbie
Joined
Nov 22, 2014
Posts
9
Reaction score
0
I used big pliers and leaned against the exhaust manifold heat shield for the hard ones.
 

Forum statistics

Threads
132,384
Posts
1,867,183
Members
97,030
Latest member
pipehand903
Top