Hyper Flash

[bigrhino]

i have led turn signal bulbs and i also purchased the load resistors for the front but i still have hyper flash. Could it be that i also have led tail lights in the back with no load resistors that i keep having this problem. Thanks.

 

[Blazed]

Yes it could be. Are they entire replacement led tail lights or did you just put led bulbs in your normal tails?

 

[josueh95]

did you connect the resistors right? i would remove the rear tailights and and put the stock ones on and then see if you have hyperflash if you do you probably didnt hook up the resistors right

 

[bigrhino]

Full led taillights. And thanks evryone.

---------- Post added at 11:50 PM ---------- Previous post was at 11:46 PM ----------

I was also thinking of cutting the wires and add the resitors that way because those clips aren't that great,they barely spliced the wires.

 

[TheFuzz]

[/COLOR]I was also thinking of cutting the wires and add the resitors that way because those clips aren't that great,they barely spliced the wires.

Do it. Those connectors SUCK. I've seen them fail more often than not.

 

[bigrhino]

Thanks again.