I officially think

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

qukon 95

Full Access Member
Joined
Apr 7, 2011
Posts
556
Reaction score
5
I think my rear end has a problem it feels like something is shifting when I punch the pedal
Or if I have people sitting in the back it does it with normal stop and go.I have no noise from the rear

The u joints are new it seems like it's the limited slip acting up.:hmmm2
 
OP
OP
qukon 95

qukon 95

Full Access Member
Joined
Apr 7, 2011
Posts
556
Reaction score
5
I had my nephew to hold the brakes & give it gas I didn't see any thing
Shifting but there is a lot of play when he let off the gas and then give it gas in the rotation it's not ujoints I did hear a little clicking in the transfer case I might have 2 things

Going bad transfer and the limited slip thingy in the rear.
 
OP
OP
qukon 95

qukon 95

Full Access Member
Joined
Apr 7, 2011
Posts
556
Reaction score
5
Yes didn't see anything moving excessive .I guess I'll pull diff cover to check limited slip.

This is a rebuilt rear end and original transfer and it does give a clunk noise sometimes when it's in park to drive like when you park on a hill it happens on level ground to.
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
188
Location
unknown at this time.
given it is a 4wd unit you will probably always have a decent clunk as there are lots of gear meshes to go thru from tranny to rear end. gets cumulatively worse with wear in the different parts. could see if the t-case output yoke might need to get its splines greased up to see if the issue is reduced.
 
OP
OP
qukon 95

qukon 95

Full Access Member
Joined
Apr 7, 2011
Posts
556
Reaction score
5
That already been done with no improvement.the play is 1/2
 

autolover3

Full Access Member
Joined
Dec 17, 2013
Posts
191
Reaction score
1
Location
Bismarck/Wahpeton, ND
There was a TSB with a updated nickel plated slip yoke or somethin that was suppose to fix acceleration from a stop clunk. Damn thing is expensive though. I just greased mine good.
 
OP
OP
qukon 95

qukon 95

Full Access Member
Joined
Apr 7, 2011
Posts
556
Reaction score
5
Well after changing spider gears it did fix the clunk when putting in gear but still has this
The shif feeling in the rear Sunday I looked under the rear again and the sway bar has play
In it I need to put all new bushings on and see if this solves the problem
 

Forum statistics

Threads
132,953
Posts
1,877,166
Members
97,869
Latest member
dwebster
Top