interior cabin filter how to remove

[johns2008]

how do you get access to the cabin filter 2008 xl

 

[Big Mama]

Remove the glove box remove the screws from the cover of the filter housing then swap them out. Be sure to vacuum it while in there.

 

[Doubeleive]

Remove the glove box remove the screws from the cover of the filter housing then swap them out. Be sure to vacuum it while in there.

wrong...

 

[Doubeleive]

how do you get access to the cabin filter 2008 xl

your 2008 may or may-not have one
if it does then you remove the kick panel on the passenger side under the glove box and there will be single screw to take out and then remove the cover plate to get access to the filter.
if there is no filter cover and it is just solid plastic, you can buy a retrofit kit (dorman makes them) you would take a razor kniife or sharp tool and remove the plastic slot in order to insert a filter and the kit will have a new cover plate and screw

 

[Joseph Garcia]

I don't know if the 2008 model year had a cabin filter. My 2007 Yukon XL Denali did not come with a cabin filter. There was, however, a spot where the cabin filter could be installed with a kit. The installation process was not difficult, and now with the kit, I have a functional cabin filter.

 

[Big Mama]

wrong...

What? I got that from the internet and the internet is always true!!

 

[Fless]

What? I got that from the internet and the internet is always true!!

And before the internet:

 

[PG01]

What? I got that from the internet and the internet is always true!!

15-20 are where you said… behind the glove box
00-14 (and prob earlier) are under the kick panel under the pass dash (if they have them)
Just fyi’s

 

[Doubeleive]

What? I got that from the internet and the internet is always true!!

only on the 2015-2020 k2's, it is indeed right behind the glove box