Interior Door Handles - Chrome Tape

[carlingas]

I took my 07 LTZ to the local GMC dealer and they replaced all 4 interior handles. Mileage was 96,800 and they took care of a recall for the windshield washer heater and I'll be waiting on a 100 check for that one...SWEET ! Man I love this truck..

 

[Bryansan]

I just had my recall work done for the interior door handles, and to my suprise, I got a $100 check from the dealer. I don't know why, it just showed up. I paid no money out of pocket originally. WIN!

 

[llllljrlllll]

FYI Dealers got a recall on all door handles to be replaced if your hoe is under warranty, just take it in and they should order the parts, and install them for free. if they want to charge you, just call gm directly, theyll take care of it for you

 

[FuzzyChopz]

FYI Dealers got a recall on all door handles to be replaced if your hoe is under warranty, just take it in and they should order the parts, and install them for free. if they want to charge you, just call gm directly, theyll take care of it for you

Just had mine done acouple days ago. I only told them about the driverside one but they replaced both the driverside and the passenger side for free no questions asked. Also they replaced my rear glass as the solder came loose from the rear defroster plug.

 

[jwilson32]

Has anyone been able to have them replaced if your out of the original 3y 36k warranty and not the original owner? I have a 2007 Tahoe with 66K miles. I have a TSB that states if there are less than 100K and 10 years old, they will take care of them. I've been getting the run around for over and month. I just want a resolution like everyone else...

 

[lknox21]

I replaced mine myself in less than 30 mins total. Pull off the door panel and there is a single pin that holds it in place. Easiest thing I've replaced on my NNBS trucks.

http://www.ebay.com/itm/231126187757

 

[tazjamin]

i just replaced mine, i got two gm handles off ebay for $12 pulled the door panels off, two screws held the whole handle then when you get that separated you have to pound a pin down , i used a chisel and a hammer because of the angle you have the chisel worked perfect, the pin comes out and pop the new one in pound the pin back in and put the door back together once i figured out the passenger door it only took me 10 minutes for the driver door.