Is anyone running this

[Wagnasty]

NORCAL SS CUSTOM 00-06 4-5/5-6 CUSTOM 00-06 Tahoe Yukon Etc Lowering kit

Thought about purchasing this instead of the 3/5-6 but wasn'tsure Iif it would be to low. Still plan on towing a car trailer occasionally. Currently have 20's with unknown offset. 275/60r/20 tires. Not sure if I would have issues with rubbing on current wheel and tire combo. I ordered a set of 24x10 and getting 305/35/24 but I want to wait until spring to put the wheels on. If I can run my current wheel/tires I'd like to go ahead and throw the drop on. Any help would be appreciated.

 

[ezdaar]

90% of everyone on this site runs those drop kits..
Hang tight, i'm sure guys will post up some pics.

 

[Wagnasty]

I hope so. I wanted to add that the vehicle is a 2003 Denali XL.

 

[NeverSatisfied]

I don't have that exact kit but have the 6" drop coils on my 5/7 drop and highly recommend those. I don't think there is one bad review about his kits and tony is always around to help. I've also purchased the adjustable Panhard from him and its a must going this low. As far as your tire size with the 20s I know that 275/55/20s will work no problem (I run 285/45/22s which are almost the same height and width) but not sure about 275/60/20s. Your 24s should work but probably will rub quite a bit. I had 295/35/24s at one point and those worked with very very little rubbing. And a lot will also depend on your offset. Really need a +30 or more wheel when lowering.

 

[NORCAL SS]

NORCAL SS CUSTOM 00-06 4-5/5-6 CUSTOM 00-06 Tahoe Yukon Etc Lowering kit

Thought about purchasing this instead of the 3/5-6 but wasn'tsure Iif it would be to low. Still plan on towing a car trailer occasionally. Currently have 20's with unknown offset. 275/60r/20 tires. Not sure if I would have issues with rubbing on current wheel and tire combo. I ordered a set of 24x10 and getting 305/35/24 but I want to wait until spring to put the wheels on. If I can run my current wheel/tires I'd like to go ahead and throw the drop on. Any help would be appreciated.

i desinged the springs around towing this is why i did a linear spring rate. If you tow its no issue. Airlift 60742 is the helper bag part number you need and will be set to go. I would do the 3 inch front drop kit its a waste of adding spindles because the 305 35 24 will be to tall. You can do the 3/5-6 kit and then 305 35 24 will be ready to roll.

 

[Wagnasty]

Yeah the wheels I ordered were +30 offset. I got the U2-55s B I know a lot of people don't like them but I like them. I probably will just get the 5/6 drop kit from him and the recommended bags. I also planned on getting the adjustable Panhard bar with the kit. Thanks for the response.

 

[NORCAL SS]

front wil hit hard this is why im saying go with the 3/5-6 kit.

 

[Wagnasty]

i desinged the springs around towing this is why i did a linear spring rate. If you tow its no issue. Airlift 60742 is the helper bag part number you need and will be set to go. I would do the 3 inch front drop kit its a waste of adding spindles because the 305 35 24 will be to tall. You can do the 3/5-6 kit and then 305 35 24 will be ready to roll.

I haven't actually bought tires yet. Just seemed a lot of people were running those and some had mentioned towing with them. If I did go with the 305/35 would it just be getting into the fender liner or would I have other issues. Sorry for all the questions just want to make sure I'm not going to have any issues as this is my Dailey driver.

 

[NORCAL SS]

i would do the 305 with the 3 front drop and woudl be cool

 

[Wagnasty]

i would do the 305 with the 3 front drop and woudl be cool

Thanks for the fast response and for only selling me what I need. Will be placing my order in the am.