CHOO CHOO
BackPagePhil
So i decided to repaint my lil boys jeep power wheels to match the gf's jeep. This was a fun little project to pass the time and pretty cheap too.
Tools i used
Phillips head screw driver
Blaze color plastidip (4 cans)
Plastidip glossifier ( 1 can)
Small flat head screw driver
Tape
This project is already done so i will make this kinda brief and not too explanitory
Every screw in this power wheels is the same length and size except two screws that hold the radio in.
---------- Post added at 03:50 PM ---------- Previous post was at 03:47 PM ----------
Complete teardown of body and all paintable pieces.
Washed and degreased as much as possible.
Main body painted and one coat of gloss, but still a few pieces left.
Deciding on whether or not i should install a headlight but not sure what to use (nothing expensive)
Tools i used
Phillips head screw driver
Blaze color plastidip (4 cans)
Plastidip glossifier ( 1 can)
Small flat head screw driver
Tape
This project is already done so i will make this kinda brief and not too explanitory
Every screw in this power wheels is the same length and size except two screws that hold the radio in.
---------- Post added at 03:50 PM ---------- Previous post was at 03:47 PM ----------
Complete teardown of body and all paintable pieces.
Washed and degreased as much as possible.
Main body painted and one coat of gloss, but still a few pieces left.
Deciding on whether or not i should install a headlight but not sure what to use (nothing expensive)