Jet throttle body

[kbuskill]

I'm not trying to stir the pot any more but if my memory serves me, I believe that @BlackBearPerf or @JennaBear stated one time that the factory TB was capable of handling something like 500hp before it became a restriction.

A larger TB will certainly give you more throttle response but that is not the same thing as more power.

 

[thompsoj22]

Snake oil....? Ok so you speak from experience. Have you had one installed on yours? Ok.so the answer is No. So how can you say it would not work? I hate people that make **** up just to be in a conversation. I asked, you don't know but your best speculation is no. Wow that's impressive. No I have not bought one yet. Just payed for a 42k trans cooler for my ppv. This will be next.

one to many sugar cookie's?

 

[Tonyrodz]

I'm not trying to stir the pot any more but if my memory serves me, I believe that @BlackBearPerf or @JennaBear stated one time that the factory TB was capable of handling something like 500hp before it became a restriction.

A larger TB will certainly give you more throttle response but that is not the same thing as more power.

I've also read that.

 

[Eod1]

You know , fu$k , all I was looking for as the OP was something like.
1. Dont waste your time.
2. There are better ones out there.
3. I use this one ________
4. Never used it.
I never thought I would get a bunch of Henry "Smokey" Yunick's wanna be's . Just so I know who is here. The more 100 dollar Bill's you throw at your hoe the faster she is going to go. It's a old drag racers saying.

 

[Doubeleive]

You know , fu$k , all I was looking for as the OP was something like.
1. Dont want your time.
2. There are better ones out there.
3. I use this one ________
4. Never used it.
I never thought I would get a bunch of Henry "Smokey" Yunick's wanna be's . Just so I know who is here. The more 100 dollar Bill's you throw at your hoe the faster she is going to go. It's a old drag racers saying.

ya the ls3/ls7 one I mentioned is like $200 cheaper, oem and probably gets the same (almost nill) results, but I figured if it's good enough for a Corvette and Camaro it's good enough for the Denali

 

[gooffeyguy]

What are the different sizes of the throttle bodies?

What is the size of the Jet one?

What is the size of the LS3/LS7 one?

I know the stock 6.2l is 87mm, what is a stock 5.3l size? Will one from a 6.2 bolt on to a 5.3?

2001 Yukon SLT
2012 Yukon Denali XL
2011 Yukon Denali RIP 5/20/18

 

[Doubeleive]

What are the different sizes of the throttle bodies?

What is the size of the Jet one?

What is the size of the LS3/LS7 one?

I know the stock 6.2l is 87mm, what is a stock 5.3l size? Will one from a 6.2 bolt on to a 5.3?

2001 Yukon SLT
2012 Yukon Denali XL
2011 Yukon Denali RIP 5/20/18

the ls3/ls7 one is 90mm so your stock intake would fit pretty snug and may take some modification to the plastic intake assembly or the engine cover, I think the oem 5.3 ones are 85? could be wrong

 

[tfi racing]

Don't forget to buy a set of MSD or Accel coils and plug wires to really take advantage of that extra airflow...

 

[01FormulaTA]

 

[iamdub]

You know , fu$k , all I was looking for as the OP was something like.
1. Dont waste your time.
2. There are better ones out there.
3. I use this one ________
4. Never used it.
I never thought I would get a bunch of Henry "Smokey" Yunick's wanna be's . Just so I know who is here. The more 100 dollar Bill's you throw at your hoe the faster she is going to go. It's a old drag racers saying.

You pretty much got #1 and #4 in the third reply, but it wasn't what you wanted to hear so you pitched a fit.