Let’s talk transmission temps

[thompsoj22]

View attachment 272912

I remember this pic, YIKES! It is what encouraged me to get the trans cooler installed. I know LS engines like/need to rev and lugging them is the worst thing you can do while towing but this pic is "juevos grande" territory! You were climbing over vail co. right?

 

[thompsoj22]

This was truly THE worst case. Running the Ike Gauntlet, at 16,300 lbs. Silverthorne to the Eisenhower Tunnel, cresting at over 11,000 feet in altitude.

I just like sharing this pic to make heads explode. Original trans, 207k miles, 30k at max GCWR. Stock coolers.

tik toc tik toc tik toc tic tok "BANG"!!!!! LOL, Im not hacking, Just the knowledge/experience of knowing you mess with the bull you will get the horns eventually.

 

[03_GMC]

I have the same rig and I have issues with it heating up. The radiator is brand new and once the temps get to 230 for coolant and trans the fans finally kick into high and it all quickly cools down. I will be adding a tru cool 40K but wanted to see pics of how guys put them in.

 

[Geotrash]

I’ve installed them in both 2012 and a 2007 Yukon XL Denali in the past few months. The difference between them is that the crossmember on the 2012 was welded to the A-frame, and it was bolted on the 2007. In both cases, I used a Dremel tool to cut away some of the crossmember flat surfaces to create clearance for the cooler pipes. I also had to cut away some of the plastic piece that holds the front bumper in place to create clearance for the relocated lines.

Some people say that you need to mount the cooler with the fittings facing up, but I didn’t do that and my coolers work fabulously anyway… Tested pulling a camper over a mountain pass my temps never got above 180°

I used the factory lines, and cut the passenger side line so I could swivel it 180° to connect to the longer cooler. I used a brass union to put the line back together. The driver’s side line has enough give to reach that side of the new cooler without any modifications.

One other thing, because the geometry on the 2007 was slightly different, I ended up having to cut 1 inch chunks of steel brake line to use as standoffs for the bottom crossmember. So the cooler on the 2007 sits about an inch further forward than it does on the 2012. I mentioning both so that you can adapt yours accordingly depending on what you find when you get in there.

Easy job, really. The pics are from the 2012.








Sent from my iPhone using Tapatalk

 

[Bill 1960]

I’ve been watching mine closely, both the original trans and my just installed GM reman run in the 190’s and sometimes over 200. This just driving around town. Of course with the 35’s it’s somewhat like trailer towing continuously.

My plan has been to add the OEM air cooler because I hate aftermarket trans coolers with hose barbs and rubber hoses. I’ve seen far too many leaks.

Thanks to @Geotrash for sharing those pictures. Seeing the Trucool 40 with hard lines has given me another option to consider.

 

[Geotrash]

One more thing. These are the fittings you will need to snap the factory hard lines into the 40K cooler. Also, I used 3/4 inch long self-drilling screws designed for metal to attach the brackets to the crossmember and A-frame. I didn’t want to be drilling holes in steel with my air conditioning condenser sitting behind it. Easy peasy.




Sent from my iPhone using Tapatalk

 

[03_GMC]

Looks like I have a factory external trans cooler. Also just got my Denali tuned and GM sets these things up for failure. Your fans don’t go over a 60% duty cycle until after 222 degrees. Not I have 97% duty cycle by the time it hits 215.



Sent from my iPhone using Tapatalk

 

[Geotrash]

Looks like I have a factory external trans cooler. Also just got my Denali tuned and GM sets these things up for failure. Your fans don’t go over a 60% duty cycle until after 222 degrees. Not I have 97% duty cycle by the time it hits 215.



Sent from my iPhone using Tapatalk

Yup, that’s a factory cooler. Tear that thing out and throw it in the trash. Lol.

Didn’t know that about the fans. Thanks for that helpful tidbit - it explains why temps go up on these things sometimes, but only so far and they don’t seem to ever boil over.


Sent from my iPhone using Tapatalk

 

[Axm1096]

So what the average temp for the engine 220

Sent from my SM-A205U using Tapatalk

 

[03_GMC]

So what the average temp for the engine 220

Sent from my SM-A205U using Tapatalk

Well these gauges typically show 210 but the engine is really running about 192-195.


Sent from my iPhone using Tapatalk