Let's see some pics of some lifted and leveled

[MadDogDelpho]

Absolutely. I've seen too many trucks shear off non-hubcentric ones.

 

[JJ351]

Bora wheel spacers. You have to go with the best because the idea of spacing wheels only for looks is downright ridiculous.

 

[NGAneer]

Finally got my 3" spindle installed. I know its got some cali lean but its growing on me.

View attachment 83763

Please tell me you're going 35s

 

[Dillon2222]

Please tell me you're going 35s

315/70R17 is what i ordered, it comes out to basically a 34, Also ordered a 3inch level spacer for the rear to help level the rear out. After looking at it driving around it does look kinda funny with the front end being as high as it is.

 

[NGAneer]

315/70R17 is what i ordered, it comes out to basically a 34, Also ordered a 3inch level spacer for the rear to help level the rear out. After looking at it driving around it does look kinda funny with the front end being as high as it is.

315s will look good, they'll squish to a 34 but at least they'll be taller on the top to fill up the fender gap.

 

[JoerubiMW3]

Anyone with 305/55/20 with a 5 inch lift?

 

[73impala]

You don't "need" hubcentric spacers. If you buy quality spacers with quality studs and torque them down properly you won't have issues. Most aftermarket wheels aren't even hub specific. I've ran non hubcentric spacers for years and haven't had any issues.

 

[Dillon2222]

Here is the final result with the new tires and bigger rear lift. I really love the results. Plus everything aligned in spec. Next is molding removal and badge removal. And oh yeah with the 34's lots of trimming for rubbage

 

[CTSVbecker]

Loving it. Nailed the trimming. Zero rub. 2.5/1 and some 275/60/20 at2 open country

Sent from my Pixel using Tapatalk

 

[Goodinblack]

Cleaned up


Sent from my iPhone using Tapatalk

That's sharp

Post more pictures

Sent from my SM-N910V using Tapatalk