Let's see some pics of some lifted and leveled

[Raptor Tahoe]

I went with an Iron Bull rear bumper for 2007 Tahoe. I like the way it wraps around to the wheel well. Also cut bumper and welded in a Wilco Hitchgate Max. Modified the Wilco to mount wheel with standard wheel studs as well... topped it all off with several coats of Raptor liner to match the Tahoe. Still working to wire the antennas to my equipment.

 

[Raptor Tahoe]

Looking tough! Bed liner?

Raptor makes a bed liner kit that comes with the spray gun. I bought the upgraded gun that allows you to adjust the texture.

The kit and sprayer are both available on Amazon and FAR cheaper than Line-X. You can also get Raptor paint that lets you mix any color. Even under coated with it.

We recently had a hail storm with tennis ball sized hail and it bounced right off the paint! Lucky the glass didn’t get blasted (was facing away from the storm).

 

[992dr]

View attachment 258840 I went with an Iron Bull rear bumper for 2007 Tahoe. I like the way it wraps around to the wheel well. Also cut bumper and welded in a Wilco Hitchgate Max. Modified the Wilco to mount wheel with standard wheel studs as well... topped it all off with several coats of Raptor liner to match the Tahoe. Still working to wire the antennas to my equipment.

Nicely done.

You might as well post more pictures before others start asking hahaha.
No really, post more pics

 

[01Konvict]

Do you remove it to trim it?

Mark the cut line while on the car and then remove to cut it. Reinstall once cut and it clips into the center section only

 

[Fubar0715]

I feel like my SSV is slightly lifted or at the very least-leveled. This '13 sits higher than my '03 did and the 275/55/20 Cooper Discoverer ATs do not rub at all. Unlike on the old 'hoe-tire fitment was no issue running the OE Silverado 20s

 

[Raptor Tahoe]

Nicely done.

You might as well post more pictures before others start asking hahaha.
No really, post more pics

Thanks. Here is the before/after of stock 2007 Tahoe LTZ with autoride “upgraded” with Fabtec Performance 6 inch lift and many other adds. The ride is better than the stock ride. I am also enjoying the tow mirrors since the spare tire blocks some of the rear view.

 

[PG01]

I feel like my SSV is slightly lifted or at the very least-leveled. This '13 sits higher than my '03 did and the 275/55/20 Cooper Discoverer ATs do not rub at all. Unlike on the old 'hoe-tire fitment was no issue running the OE Silverado 20sView attachment 258906

Looks light a front level... take a peek under struts.... or above...
Above

Under

 

[MattC259]

Finally got it out on Assateague today. Drove great. 2 highlights: dual battery which ran our fridge all day and the rack so much room and solid.



A lot of ponies out there today.



Sent from my iPhone using Tapatalk

Love to hear more about how/where dual battery goes/installed.

 

[MattC259]

Mark the cut line while on the car and then remove to cut it. Reinstall once cut and it clips into the center section only

Thanks!

 

[MattC259]

Vinny- looks great! Which kit? Issues with surprise or did you use a relocation bracket?

Phone auto corrected suspension to surprise somehow. Duh.