Lifting

[Codex]

Ok so I decided that after my wedding I'm going to lift my tahoe 6" and put some 35's under it. My question to you guys is are there any true 6 inch lifts left? I see a bunch where it looks like you have to crank to get the full 6. Help me please

 

[Jerky Arm Ape]

http://tahoeyukonforum.com/forum/showthread.php?t=43294

 

[Donnie Yukonie]

http://tahoeyukonforum.com/forum/showthread.php?t=43294

ThIs ^

 

[Codex]

Yea I saw the obs lift thread. All it told me is rcx is 5" and DC is a 6.5" that you can't buy anymore.

 

[Donnie Yukonie]

Yea I saw the obs lift thread. All it told me is rcx is 5" and DC is a 6.5" that you can't buy anymore.

To be honest your not cranking to much . 1 inch of Crank will not hurt your truck

 

[Codex]

I'm not worried about hurting the truck. I'm more so looking at height.

 

[Donnie Yukonie]

I'm not worried about hurting the truck. I'm more so looking at height.

Not sure about the other lifts but I know for a fact the SuperLift is capable of 8 inches of total lift . Thats with Cranking the torsion bars to their limit (not advisable) Modification of the rear usually involves using a combination of a block and AAL . Superlift has dropped their prices . last month It used to be one of the more expensive lifts , Its still more than the RCX but both Kits are great

 

[Codex]

The super lift website says between 4-6 inches of lift for the front. To me that means a 4 inch lift that can crank to 6. Is there a bigger super lift I'm not seeing?

 

[Donnie Yukonie]

Id call them IIRC they have a 4 inch kit and a six inch kit , My lift is like right at 5 inches of drop

 

[Codex]

I called them and they only offer the one lift. It's a 5 inch drop and you crank to 6. I don't have a problem cranking to 6 I just wanted to know if there was a full 6 inch drop left out there.

---------- Post added at 05:35 AM ---------- Previous post was at 05:33 AM ----------

I'm also reading that the rcx has a lot of cutting involved? How much cutting was involved with your superlift don?