Little help please

[Danielgreig]

So I have been searching the forums for the past couple days and I can't seem to find what I am looking for. I am going to be helping a buddy of mine do his 3/6 drop that he got from Tony and before we get started I was looking for some help on what tools we would need to do the install. I remember awhile back I had ran across a thread that listed out all the tools and wrench/socket sizes needed but I can't seem to find it now. Does anyone know which post I'm talking about or can list out the tools needed for me? We will be doing the drop at a friends house and he does not have any sort of tools, so we need to collect everything needed in advance and bring them with us. Thanks in advance for your help!!


Sent from my iPhone using Tapatalk

 

[Donnie Yukonie]

I just tried and came up with no tool listing , I would imagine (disclaimer never done a drop) that you would need at least
2 jacks
2 jack stands
a good HAMMER
an assortment of sockets mainly 1/2 and 3/4
pry bar
screw drivers
Impact gun (if available)
and beer

 

[M Hankel]

Theres a huge metric size nut for the front hub/axle, cant recall the size off the top of my head, 28mm or 30mm maybe?. Had to go buy one when I installed my drop arms. An impact is almost a must for this.

Have you looked through the install instructions? Im assuming its 3" drop arms?

http://djmsuspension.com/applicatio...4wd-kits/2000-2006-tahoe-yukon-2wd-4wd-parts/

Hope that helps a little.

Mike

 

[dropmech]

2WD, 4WD? Keys?

 

[Danielgreig]

Thanks for the replies. Yes it is the 3" drop a arms and it is the 4wd.


Sent from my iPhone using Tapatalk