Lowering rear only?

[Brent]

I'm tired if my Yukon looking like a grasshopper. I don't want to lower it to much but would like to lower the rear only. Has any body done this? If so how does it ride and what springs did you use?

 

[NathanJax]

It's done a lot. Talk to Tony our forum sponsor in this section

http://www.tahoeyukonforum.com/forum/forumdisplay.php?f=52

and you can get belltech 2" rear springs. If it's not perfectly level (because no 2 trucks are the same) you can always get a spacer to adjust it back up a little higher

 

[livingez_123]

I think a 1" spring would be just right

 

[Goodinblack]

I have 2 inch springs with a .75 inch spaxer

 

[Tahoebigdog03]

How's the ride with the 2 inch springs? I'm looking to change my look also from the nose dive look. Lol

 

[Goodinblack]

I love my setup

I also run:

Airlift 60742

Bell tech shock relocators

.75 spacers

Z71 Red AcDelco OEM shocks




Its smoother than stock........because the 2 inch drop spring is softer rate then oem

All this is in my build thread along with pitchers

 

[Rpav]

I have eibach 2" springs for sale here in SoCal if you're interested.

 

[mlux2008]

I'm tired if my Yukon looking like a grasshopper. I don't want to lower it to much but would like to lower the rear only. Has any body done this? If so how does it ride and what springs did you use?

Did you ever get this squared away? I'm curious what all is involved in leveling a 04-06 denali

 

[Brent]

No, haven't had the funds available. Probably going to use Ebach springs in rear cause of cost. They seem to be the cheapest I've found.