Lowering Rear Spring options?

[BADRIDES]

$140 shipped and $277 shipped new on belltech site shipped.

 

[chilleblanco36]

$140 shipped and $277 shipped new on belltech site shipped.

Not bad. Trying to decide between the PPV springs. What's the part number on yours if you don't mind

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

[BADRIDES]

5305-001 H15

 

[KBones]

never heard anything about sagging. I took mine out caused they rubbed the frame on the right side of my 02 Tahoe

Yeah.. not sure how they can sag..

 

[chilleblanco36]

Yeah.. not sure how they can sag..

I guess sagging may not be the correct term. The rear sitting lower than the front in due time instead of actually level

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

[KBones]

I guess sagging may not be the correct term. The rear sitting lower than the front in due time instead of actually level

Sent from my SAMSUNG-SM-G935A using Tapatalk

Oh right. Gotcha. They usually can take close to a month to completely settle(depending on your driving)

 

[BADRIDES]

I guess sagging may not be the correct term. The rear sitting lower than the front in due time instead of actually level

It would take years for a spring to sag. I dont think belltech makes products like that especially for what they cost.

 

[Goodinblack]

They don't sag. The truck looks like it's sagging till you drop the front. Then the springs look like they are too high.

Sent from my SM-N910V using Tapatalk

 

[chilleblanco36]

So you're saying if I level it with the beltech springs I'm still going to have to lower the front?

The guy with the PPV springs says his has a slight rake to it

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

[KBones]

I guess sagging may not be the correct term. The rear sitting lower than the front in due time instead of actually level

Sent from my SAMSUNG-SM-G935A using Tapatalk

Oh right. Gotcha. They usually can take close to a month to completely settle(depending on your driving)

So you're saying if I level it with the beltech springs I'm still going to have to lower the front?

The guy with the PPV springs says his has a slight rake to it

Sent from my SAMSUNG-SM-G935A using Tapatalk

You can put a spacer in with the spring if its too low. Or just get springs that sit at the level you want.