Lowering/Suspension Tune Up Parts List

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

brotten

Member
Joined
Jan 12, 2014
Posts
69
Reaction score
22
Location
Kansas City
2005 Tahoe 4x4 Non Autoride
With my rig pushing 90k and the desire to lower it I've started a collection of parts to over haul my suspension and do a 3/4 drop at the same time. I've got the rear springs already and plan to do rear Monroe air shocks with a small compressor to change the shocks on the fly since I have ran this setup on a lowered truck before with great success. I'm planning to also service the brakes when I am doing the front and rear overhaul and do the free travel mod. The front end is going to be DJM 3" lower arms but I can't decide what shocks to use on the front. Can I use a police package shock up front since they sit lower and should have a more firm response? Also plan to do the hubs and tie rods while I'm at it. Like I said I'm collecting parts to knock this all out at once so any suggestions on what to use would be great.

Sent from my SM-N900V using Tapatalk
 

NORCAL SS

SUV SUSPENSION GURU
Supporting Vendor
Joined
Jun 9, 2009
Posts
8,744
Reaction score
608
2005 Tahoe 4x4 Non Autoride
With my rig pushing 90k and the desire to lower it I've started a collection of parts to over haul my suspension and do a 3/4 drop at the same time. I've got the rear springs already and plan to do rear Monroe air shocks with a small compressor to change the shocks on the fly since I have ran this setup on a lowered truck before with great success. I'm planning to also service the brakes when I am doing the front and rear overhaul and do the free travel mod. The front end is going to be DJM 3" lower arms but I can't decide what shocks to use on the front. Can I use a police package shock up front since they sit lower and should have a more firm response? Also plan to do the hubs and tie rods while I'm at it. Like I said I'm collecting parts to knock this all out at once so any suggestions on what to use would be great.

Sent from my SM-N900V using Tapatalk

belltech sp all the way here check this kit out

I speced the rear springs and that kit right there rides very smooth as you can see in feedback on the board.

Now due to the fact my springs are linear it tows better with the airlift helper bags in the rear. 04 suburban same kit towing a customers big block c10 is no issues with the helper bags in.


Any other questions just ask and here is a good read up on the kit
http://tahoeyukonforum.com/forum/showthread.php?p=624716


so you know the airlift helper airbags will tow better than the airshocks.
 

Forum statistics

Threads
133,013
Posts
1,878,442
Members
97,966
Latest member
EdwardsD
Top