Magenride + 3inch Lift

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

SmileB44Death

Full Access Member
Joined
Oct 30, 2017
Posts
229
Reaction score
189
Location
Seattle
Hello,

To all my magenride folks…
Platinum owners

Does this 3 inch hockey puck level work with the magenride. Moreover, are you still able to plug in that top magenride sensor?

If someone can provide pictures that would be a plus
*THANKS IN ADVANCE
 

Attachments

  • 322BB570-AD47-4E68-8749-7503A106E02B.png
    322BB570-AD47-4E68-8749-7503A106E02B.png
    629.2 KB · Views: 1

Trey Hardy

8” fabtech icon coilovers uniballs 24x14on35/15.50
Joined
Jun 12, 2020
Posts
3,330
Reaction score
8,868
Location
Eastern North Carolina
Hello,

To all my magenride folks…
Platinum owners

Does this 3 inch hockey puck level work with the magenride. Moreover, are you still able to plug in that top magenride sensor?

If someone can provide pictures that would be a plus
*THANKS IN ADVANCE
Yes it’ll work plug you can access from the top of the strut tower.
Might need longer rods for the sensors though
 
OP
OP
SmileB44Death

SmileB44Death

Full Access Member
Joined
Oct 30, 2017
Posts
229
Reaction score
189
Location
Seattle
So it will plug in but it will need a longer rod? What did you mean by this?
 

Trey Hardy

8” fabtech icon coilovers uniballs 24x14on35/15.50
Joined
Jun 12, 2020
Posts
3,330
Reaction score
8,868
Location
Eastern North Carolina
Look on the driver strut on the right side will be a sensor with the rod connected to the control arm for the auto level sensor
For it to work properly you’ll need longer rods to accommodate for the lift
 
OP
OP
SmileB44Death

SmileB44Death

Full Access Member
Joined
Oct 30, 2017
Posts
229
Reaction score
189
Location
Seattle
Look on the driver strut on the right side will be a sensor with the rod connected to the control arm for the auto level sensor
For it to work properly you’ll need longer rods to accommodate for the lift
Okay I already had those from my previous 2 inch level. The hockey puck seemed like it wasn’t going to allow me to connect the top sensor so I just went with a 2.5 inch level from the bottom strut
 
OP
OP
SmileB44Death

SmileB44Death

Full Access Member
Joined
Oct 30, 2017
Posts
229
Reaction score
189
Location
Seattle
Okay I already had those from my previous 2 inch level. The hockey puck seemed like it wasn’t going to allow me to connect the top sensor so I just went with a 2.5 inch level from the bottom strut
Thanks for the link I’ll forsure need to keep those in mind
 

Trey Hardy

8” fabtech icon coilovers uniballs 24x14on35/15.50
Joined
Jun 12, 2020
Posts
3,330
Reaction score
8,868
Location
Eastern North Carolina
Okay I already had those from my previous 2 inch level. The hockey puck seemed like it wasn’t going to allow me to connect the top sensor so I just went with a 2.5 inch level from the bottom strut
It should unless the wires come out short?
 
Top