Making my own panhard..What size bushings?

[Nickleahy23]

I got access to the metal lab here at school and should be able to get a discount on parts through the Baja club...What width bushing do I need for the panhard? Also, anyone know off hand what length i need so I can order it without taking the stock one off?

My tire is almost flush with the body on the pass side, and sits way in on the driver side and rubs...i wanna get it fixed before i **** the tires up..

I might just go with this...$60 shipped to my door..as long as i can get the right length and width bushings..

http://qualityairride.com/4-link-parts/4-link-bars/4-link-round-adj-bar-poly-bushings

 

[J-dub]

In for answers as well!

 

[Nickleahy23]

id go crawl under the truck, but the ******* gravel driveway at my house at school is a little sloppy lol..

 

[J-dub]

You want the measurement from center of the bolt to center of the bolt correct?

 

[Nickleahy23]

You want the measurement from center of the bolt to center of the bolt correct?

yes sir..and if theres any way to check the bushing width...

 

[NORCAL SS]

make sure its not offset

 

[MeanGreen03]

How much adjustability are in their bars? Is it even stated anywhere?

 

[J-dub]

I'm gonna check it out today when I get off class... What do you mean "offset"?

 

[WHITEOUT]

Alright Guys, I just ordered and went thru this 2 weeks ago!! Here is what I learned!!

Panhard bar: Length-33 1/2" center to center- Now, most adjustable bushing endlinks like from Suicidedoors.com, the bolts are around 3" long. Now, you really wouldn't want to go more then 1 1/2" extended out. So odering stock length, you can then extend outward, but always be able to go back to stock.
Bushings measure 2" wide, both ends.

Most GM SUVs 2000-2006 "SHOULD" be the same. I would suggest measuring your just incase. But if Spohn sells them for GM SUVs 2000-2006, they all must be the same length and width.

Disclaimer: These are measurements I got from my own personally vehicle, and what I ordered for my bars. I will post pics and more detailed writeup next week or so. NICK-told you I was gonna do a writeup!!! LOL

 

[Nickleahy23]

Alright Guys, I just ordered and went thru this 2 weeks ago!! Here is what I learned!!

Panhard bar: Length-33 1/2" center to center- Now, most adjustable bushing endlinks like from Suicidedoors.com, the bolts are around 3" long. Now, you really wouldn't want to go more then 1 1/2" extended out. So odering stock length, you can then extend outward, but always be able to go back to stock.
Bushings measure 2" wide, both ends.

Most GM SUVs 2000-2006 "SHOULD" be the same. I would suggest measuring your just incase. But if Spohn sells them for GM SUVs 2000-2006, they all must be the same length and width.

Disclaimer: These are measurements I got from my own personally vehicle, and what I ordered for my bars. I will post pics and more detailed writeup next week or so. NICK-told you I was gonna do a writeup!!! LOL

haha thanks man..I just got excited about it when i was sittin around bored..

The smallest links from SD.com are 2.5 wide, so those arnt going to work..shit