- Joined
- Jun 9, 2009
- Posts
- 8,744
- Reaction score
- 608
Well if you guys saw my other thread been working 14 to 16 hour shifts since April to pay for this car and reached my goal. Z06 is due here in few weeks (selling my fiat first so if it takes longer oh well) but have to get mods going first
I have about 12 weeks before my car gets here. 3LZ with Z07 package with A8 but mods come first
I deal with American Racing Headers a lot on the boards so just fitting to go with the 2" non catted set up (yes passes california smog fine lol)
Other mods coming
Intake
Lower Crank pulley
E85 KIT
Tune by LT1Z
My custom 2.5 gallon underhood hx tank upgrade
345 35 18 M&H Drag Radials
18x13 Wheels (still trying to find out whose 18 inch rim will clear the big brake set up in rear)
Shooting for 675 to 700 at wheels
1/4 mile time goal 9.9999999999
oh and my ctsv vid. Im debating on doing a cam in the Z06.
https://www.youtube.com/watch?v=ZcbuaXiM9N0
---------- Post added at 10:31 PM ---------- Previous post was at 10:31 PM ----------
Got headers back from coating for my car (i have another 2 sets here)
and the IW crank pulley
---------- Post added at 10:32 PM ---------- Previous post was at 10:31 PM ----------
also im a sucker for 5 spoke wheels. I ordered these today but wait till you guys see the color i choose. I went with 18x6 front and 18x12.5 rear. 185 50 18 m&H front runners and 335 30 18 hoosier slicks for the back
I just wanted a clean 5 star design no one else has done from forgeline.
---------- Post added at 10:32 PM ---------- Previous post was at 10:32 PM ----------
jacking pucks as well as the LMR billet housing with 160 degree thermo came in
---------- Post added at 10:33 PM ---------- Previous post was at 10:32 PM ----------
VALVE covers are done
335 30 18 DRAG RADIALS kid approved
kid approved
fronts came in also
front tires came in
I have about 12 weeks before my car gets here. 3LZ with Z07 package with A8 but mods come first
I deal with American Racing Headers a lot on the boards so just fitting to go with the 2" non catted set up (yes passes california smog fine lol)
Other mods coming
Intake
Lower Crank pulley
E85 KIT
Tune by LT1Z
My custom 2.5 gallon underhood hx tank upgrade
345 35 18 M&H Drag Radials
18x13 Wheels (still trying to find out whose 18 inch rim will clear the big brake set up in rear)
Shooting for 675 to 700 at wheels
1/4 mile time goal 9.9999999999
oh and my ctsv vid. Im debating on doing a cam in the Z06.
https://www.youtube.com/watch?v=ZcbuaXiM9N0
---------- Post added at 10:31 PM ---------- Previous post was at 10:31 PM ----------
Got headers back from coating for my car (i have another 2 sets here)
and the IW crank pulley
---------- Post added at 10:32 PM ---------- Previous post was at 10:31 PM ----------
also im a sucker for 5 spoke wheels. I ordered these today but wait till you guys see the color i choose. I went with 18x6 front and 18x12.5 rear. 185 50 18 m&H front runners and 335 30 18 hoosier slicks for the back
I just wanted a clean 5 star design no one else has done from forgeline.
---------- Post added at 10:32 PM ---------- Previous post was at 10:32 PM ----------
jacking pucks as well as the LMR billet housing with 160 degree thermo came in
---------- Post added at 10:33 PM ---------- Previous post was at 10:32 PM ----------
VALVE covers are done
335 30 18 DRAG RADIALS kid approved
kid approved
fronts came in also
front tires came in
