Need a lil help...

[PPV12HOE]

Anybody have the wiring diagrams for the rear doors... Trying to get the rear windows to work and door locks to activate... tried new switches and that still didn't work so now I need to check the wiring...

 

[wjburken]

Anybody have the wiring diagrams for the rear doors... Trying to get the rear windows to work and door locks to activate... tried new switches and that still didn't work so now I need to check the wiring...

See if this gets you what you need.

https://www.gmupfitter.com/publicat/2012_BB/LD_2012_CK Truck Electrical 112911.pdf

http://www.gmupfitter.com/files/media/photo/460/2012 Police Specifications Manual 9-29-11.pdf

 

[PPV12HOE]

See if this gets you what you need.

https://www.gmupfitter.com/publicat/2012_BB/LD_2012_CK Truck Electrical 112911.pdf

http://www.gmupfitter.com/files/media/photo/460/2012 Police Specifications Manual 9-29-11.pdf

Thanks for the info... I had the upfitters manual... But that electrical diagram that's what I was looking for... it's perfect maybe I can get this wiring sorted out now...

 

[wjburken]

Thanks for the info... I had the upfitters manual... But that electrical diagram that's what I was looking for... it's perfect maybe I can get this wiring sorted out now...

Hope it helps. Good luck.

 

[Doubeleive]

from what I remember reading on here before usually the wires are just cut inside behind the door panel. patch them back together and you should be good.

 

[PPV12HOE]

from what I remember reading on here before usually the wires are just cut inside behind the door panel. patch them back together and you should be good.

Yeah they have been cut and spliced and wires added... they even wired a new pigtail and then left half inch long bare spots in some of the wires... it's a mess... @wjburken gave me some great wiring diagrams just need to double check the pinouts and get the wires straightened back out... that's tomorrow's project... hopefully...

 

[Eod1]

Make sure it wasn't something program ed into the system. I know once I got my dic button back into the dash j think there was a option to turn those switches off. I think

 

[PPV12HOE]

Anybody have a pin out diagram for the window switch plug...? I'm thinking that the plugs are wired incorrectly...

 

[wjburken]

Anybody have a pin out diagram for the window switch plug...? I'm thinking that the plugs are wired incorrectly...

The schematic I sent you a link to should have that information in Section C I think rear doors are page C-27 & C-29.

 

[PPV12HOE]

The schematic I sent you a link to should have that information in Section C I think rear doors are page C-27 & C-29.

It's got the schematic for the wiring but not a pin out for the plug... at least not that I have found yet...