ArchieMcWiener
TYF Newbie
- Joined
- Jan 6, 2024
- Posts
- 2
- Reaction score
- 9
I just bought a new to me 2013 Denali with 115k on the clock. I've already been searching and reading a ton on here (there is a ton of good information, thank you all for your input) and I'm looking forward to learning and posting more. So far I've replaced the taillights, upper and lower grill, and started blacking out the emblems and chrome. Next on the list will be suspension drop, wheels, carplay, and headlights because the stock ones are unfortunate looking.
I do have one question for the group that I am not finding through my searches. With the age and mileage of my truck, is a afm delete device from range technologies and a catch can still worth it? I get their value for newer vehicles but I am wondering if it's barely a band-aid at this point.
Thanks for the add and I went ahead and posted my experience with the taillights below:
I first bought some vland taillights and they fit horribly. Everything else from the gasketed connectors to the packaging were top notch, but I couldn't get them to fit correctly. They left a huge gap at the top and rubbed against the tailgate on the drivers side. I replaced them with some Acanii (also on amazon) branded ones and they fit much better but use a much cheaper resistor and connector for the resistor. Small issues that I can address but still worth mentioning.
Vland
Acanii
I do have one question for the group that I am not finding through my searches. With the age and mileage of my truck, is a afm delete device from range technologies and a catch can still worth it? I get their value for newer vehicles but I am wondering if it's barely a band-aid at this point.
Thanks for the add and I went ahead and posted my experience with the taillights below:
I first bought some vland taillights and they fit horribly. Everything else from the gasketed connectors to the packaging were top notch, but I couldn't get them to fit correctly. They left a huge gap at the top and rubbed against the tailgate on the drivers side. I replaced them with some Acanii (also on amazon) branded ones and they fit much better but use a much cheaper resistor and connector for the resistor. Small issues that I can address but still worth mentioning.
Vland
Acanii