new with a few questions....

[loco]

im new to the site. and had a few questions of my own.. after spending time trying to find this out, looking through all the pages that came up. I still can not find this out.. So what that being said, is there a way to remove the traction control on a 03 Denali? IF there is a post on here, and i did not see it i apologize... seeing that i dont have an option to switch moods.. a fuse, relay, something..


question number two.... so as im driving and i go to get it full throthal, it lags, then pulls from 3000 to about 5000 and after that it just wont build top end.. it has a k&n, bad ass torque converter, 3000 stall, shift kit. etc.. point is its not a stock yukon... i changed out the fuel filter, plugs, MAF, wires.. just bought a intake manfiold kit, waiting to put it on... so as i think i lost you guys lol why am i not building power up top....



question number 3........ kindda the same question as number 2... from time to time, when i take off from a dead stop, it feels like its lacking power for a sec or 2. then it gets up to speed, then come to a stop to only sound like its missing.. but i said on number 2.. i changed out a few things hoeping it would help... still the same... could it be something that is also holding me back from my top end? it still gets the job done for the most part.. but not like it used too... any ideas, opinions something would be he

 

[Drok]

idk if it has to do with ur issues but mine was laggy on take off then threw a code for the bank 2 knock sensor. so i replaced both knock sensors and it seemed to be the issue for mine.

 

[2kwik4u]

The AWD on the '03 Denalis is a purley mechanical system. SO you'll never do a "burnout" in the traditional sense of the word. As for Stability Control, I'm unsure.

Do you have a custom tune for all those mods (namely the convertor)?!?!

 

[loco]

ive changed out all the 02's already, havent tried a knock sensor yet.. just dont wanna keep putting money into sensors if its not the case.. they ant cheap as is lol

---------- Post added at 05:07 AM ---------- Previous post was at 05:02 AM ----------

The AWD on the '03 Denalis is a purley mechanical system. SO you'll never do a "burnout" in the traditional sense of the word. As for Stability Control, I'm unsure.

Do you have a custom tune for all those mods (namely the convertor)?!?!

i noticed that everytime i lunch. traction control turns on, that is way im asking if i could or is a way of shutting it off. but it dose have the stability control, which i dont know what ill use it for.. as for the tune i dont yet. not till i figure out whats causeing me to lose power.. might be to lean or to rich..dont wanna take a chance of nessing up the tune. then paying to do it again

 

[Drok]

yea i know what ya mean both my knock sen cost me $80 to do and still need to do b2 o2 sen ... dam sensors haha

 

[loco]

tell me about it

 

[loco]

so no one else has any other thoughts?????? smh