Nivomats Blown: Whats the move?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

blueinkd

Full Access Member
Joined
Nov 21, 2017
Posts
633
Reaction score
1,511
2005 LT Tahoe 2WD.
Daily driver/Mobile office
Has the fancy nivomats in the back. One of them is leaking slightly but no rear sag in the back. I quoted them at just a hair over $500 for a new pair. I'm looking for comfort and ride performance. I don't want an increase in height with a diff setup but what is everyone going with for optimal performance.

-Basically tell me what you have replaced them with and your impressions?? Up front I have KYB monomax (Grey ones) for the appropriate ride code.

- I am well aware new springs might be in order to match diff shocks.
 
Last edited:

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
19,582
Reaction score
26,270
Location
Treasure Coast, Florida
2005 LT Tahoe 2WD.
Daily driver/Mobile office
Has the fancy nivomats in the back. One of them is leaking slightly but no rear sag in the back. I quoted them at just a hair over $500 for a new pair. I'm looking for comfort and ride performance. I don't want an increase in height with a diff setup but what is everyone going with for optimal performance.

-Basically tell me what you have replaced them with and your impressions?? Up front I have KYB monomax (Grey ones) for the appropriate ride code.
If you dump the Nivomats for simple shocks, your springs will not be up for the task. The ones you have are softer to work with the Nivomats. If yours were mine, I'd put on new Nivomats.
 
OP
OP
blueinkd

blueinkd

Full Access Member
Joined
Nov 21, 2017
Posts
633
Reaction score
1,511
If you dump the Nivomats for simple shocks, your springs will not be up for the task. The ones you have are softer to work with the Nivomats. If yours were mine, I'd put on new Nivomats.
I should have made this clear in the post. I understand the springs currently on the truck are matched to the nivomats. I don't mind replacing them if needed.
 

Joseph Garcia

Supporting Member
Joined
Aug 2, 2018
Posts
7,340
Reaction score
9,921
Your overall best bet is to replace the Nivomats. If you purchase other shocks AND replacement springs, you will find yourself in the vicinity of the cost of replacement Nivomats, and you won't have to purchase and install resistors to avoid codes in your DTC.
 

Fless

Staff member
Super Moderator
Joined
Apr 2, 2017
Posts
11,856
Reaction score
24,115
Location
Elev 5,280
An option is to look at upull or LKQ yards for used Nivomats with lower miles. A long shot, but it's possible they have some.
 
OP
OP
blueinkd

blueinkd

Full Access Member
Joined
Nov 21, 2017
Posts
633
Reaction score
1,511
Got 2 new AC Delco nivomats on order:(. Should have this afternoon
 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
19,582
Reaction score
26,270
Location
Treasure Coast, Florida
Your overall best bet is to replace the Nivomats. If you purchase other shocks AND replacement springs, you will find yourself in the vicinity of the cost of replacement Nivomats, and you won't have to purchase and install resistors to avoid codes in your DTC.
No wires with Nivomats Joe. That's what your high dollar Denali needs though! hehehe
 

Forum statistics

Threads
132,312
Posts
1,865,767
Members
96,903
Latest member
Joe Hale
Top