Not your typical suspension question.

[Jeremy the 3]

I have an 03 Yukon xl Denali 1500. The auto level conked out a few years ago, bags had holes and burnt out the pump. I put in some heavy duty springs because we tow a 32 foot camper but the ride height in the rear is considerably higher then the front which is still the electronic shocks. I need new shocks front and back but don't know if I need shocks for a lift or not. Can this be figured out by the wheel gap?

 

[denali5500]

If you want to level out the front, I suggest installing 2-3 inch torsion keys. The height can be adjusted accordingly. You can keep the shocks you have up front but by this time, you should really look into some Bilstein 5100's.

 

[denali5500]

To replace the rear shocks, buy Bilstein 5100's and they should be a straight swap. Disconnect the battery and remove the autoride fuse to get rid of the warning in the dash. The compressor can also be removed as they have no need.