Official 00-06 Tahoe/Yukon/Escalade drop guide with pics...

[Tonyrodz]

You can see in this pic how close it is to the axle.

Sent from my SM-G973U using Tapatalk

Looks like it's right on top of the axle.

 

[ThwopKing]

Nevermind figured it out lol. But we didn't install the pucks in back. Will most definitely have to lol. Im not into squatting....

Sent from my SM-G973U using Tapatalk

 

[ThwopKing]

Tony Luke says the front will settle after I drive it a bit.... So now I dont know if I want to DE-crank the keys and drop the front an inch or add the pucks in back and raise it up an inch on the rear.
We still have to do the free travel mod, check the torque on everything and align it. SO we will see what happens.....ill think on it over the weekend.

 

[BADRIDES]

Tony Luke says the front will settle after I drive it a bit.... So now I dont know if I want to DE-crank the keys and drop the front an inch or add the pucks in back and raise it up an inch on the rear.
We still have to do the free travel mod, check the torque on everything and align it. SO we will see what happens.....ill think on it over the weekend.

What size are those tires?

 

[ThwopKing]

What size are those tires?

I believe 275/55/20... I'll check on Monday

Sent from my SM-G973U using Tapatalk

 

[ThwopKing]

What size are those tires?

275/55/20 actually

 

[donbalo]

got a 04 tahoe
2inch drop spindles
torsion keys lower a little
3inch lower springs
and belltech lowered shocks
new front and back sway bushings
has dubs 24 inch with spike lugs
pzero 305/35/24



rides good but when i hit bout 70 or so it has a wobble and i notice that my front driver side sit a little lower than passenger side . cam that be the wobble issue ? other than that it run s great

 

[BlackedOutHoe]

Model/Year/2x/4x/AWD:
- 2003 Tahoe Z71 4x4

Advertised drop:
- Not sure/2"

Fender height front/rear:
-34.5" Front / 34" Rear

Front:
- LCA's : Stock
- UCA's : Stock
- Spindles : Stock
- Sway Bar : Stock
- Tie Rods : Stock
- T-bars : Stock
- T-bar keys : Stock decranked
- Shocks : Belltech Street Performance
- Steering : Stock

Rear:
- UTA : Stock
- LTA : Stock
- Springs : Crown 2" Drop Coils
- Panhard : Stock
- Sway Bar : Stock
- Shocks : Belltech Street Performance
- Air Assist : None
- Free Travel Mod: Yes

Wheels & Tires:
- Wheels : OEM Texas 20's
- Tires : Cheapo 275/55/20

Considered upgrades:
- 2" MCG/BT drop spindles and 3-4" drop coils for more low. Pictures make it have too much fender gap lol
- Helper bags in the rear

Brief impressions of setup:
Overall, the ride is firm but not stiff. For me, it's low, but not too low to where I have to worry about scraping. It's a great daily height.

 

[BlackedOutHoe]

K, so wanting to go lower. Plan to get the Belltech 2/4 kit with spindles from Tony.

Question is, can I run stock 275-55-20's with no rubbing issues? I will be installing helper bags also.

Thanks!

 

[05Single]

K, so wanting to go lower. Plan to get the Belltech 2/4 kit with spindles from Tony.

Question is, can I run stock 275-55-20's with no rubbing issues? I will be installing helper bags also.

Thanks!

There will be no rubbing issues , you’re good to go