Replaced the evap canister and still getting these two codes every few days after I reset them with the scanner, my guess is everytime a drive cycle is complete they come back on. Replacing the gas cap tonight, which would have been the faster and easier fix but apparently thats not me. Any other ideas? I know the 4055 is the evap leak code but what is the 4096?? Looked all over the internet, even searched on here and couldn't find it.
P04055 and P04096 Trouble Codes
- Thread starter jkstop
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
rob71
TYF Newbie
I think you might have an extra digit in your codes that doesn't belong there.
I did a little Googling and found these codes which might be what you're looking for:
P0455 is an evap leak.
P0496 is for undesired intake manifold vacuum to the evap system. possibly a bad purge solenoid valve. "Evaporative Emission System High Purge Flow"
I did a little Googling and found these codes which might be what you're looking for:
P0455 is an evap leak.
P0496 is for undesired intake manifold vacuum to the evap system. possibly a bad purge solenoid valve. "Evaporative Emission System High Purge Flow"
Sidepipes
TYF Newbie
I had the P0496 code, and found that the purge solenoid valve, on the intake manifold, was faulty -- not shutting off completely. Replaced it, reset the codes, and hopefully they'll stay off.
