So I decided today to take the debadging plunge on the 'hoe. I removed the driver's side chrome/stainless fender trim, and found underneath that it had worn through to the primer in a couple places. My question is, has anyone ever painted their fender trim? I was looking at the "Shadow" black chrome paint from Dupli-Color, but I'm not sure how that would turn out. They also have "trim" paint, but my truck is black so not sure how this would look.
Painting fender trim?
- Thread starter dachrist
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
AtomicHoe094
Atomichoe094
trim paint is almost like a flatblack or a satin black. No means anything near gloss black like your truck..
Buy a red scuff pad for paint and throw a couple layers down with an type of GB spray paint. itll be fine
Buy a red scuff pad for paint and throw a couple layers down with an type of GB spray paint. itll be fine
the 18th letter
Full Access Member
+1 on the BG.
I did the black chrome on my trim, my Kon is black too, and didn't like the way it played with the black paint, 2 different shades. Did trim over in BG and liked it better. I also added 2 coats of clear when done.
I did the black chrome on my trim, my Kon is black too, and didn't like the way it played with the black paint, 2 different shades. Did trim over in BG and liked it better. I also added 2 coats of clear when done.
