Pinless Accumulator install

[TheAutumnWind]

Has anyone installed these with the trans still in the vehicle? Sounds like it's doable from what I have read.

http://www.sonnax.com/parts/2520

http://www.sonnax.com/parts/2518

 

[4WDTRK]

Good question. I know the shop did mine while the tranny was out, but it was removed when I had the torque converter replaced.

 

[TheAutumnWind]

By the sounds of it valve body needs to be removed for the 3-4 accumulator. I don't think I feel like doing that.

Probably just do 1-2 accumulator, forward accumulator, filter, fluid and boost valve when i get a chance.

Looks like you can upgrade the accumulator spring too...if you are into hard shifts.

http://www.oregonperformancetransmission.com/mm5/merchant.mvc?Screen=PROD&Product_Code=SNX-77704S


I keep forgetting to check PT.net those guys are way more into this stuff.

 

[drivnovrdaedge]

Last weekend I finished installing the sk 4l60e shift kit, 1-2 pinless kit and corvette servo.

Just to let you know the 1-2 pinless needs 2 metal balls hammered into where the metal pin use to be so it might be difficult depending on the space and angle.

I didn't do the pinless for 3-4 as the shift kit provided a new spring for there while the 1-2 had a plastic diaphragm so it needing replacement.