Please Help I cannot figure out how to remove the rear folding bench seat in my 1997 2 dr Tahoe

[makindust2]

I took out the front bolts ,But cannot see how to remove the rear . Thanks in Advance Skip

 

[drakon543]

You will need to flip just the bottom part of the seat forward leaving the back rest upright. Should see another set of bolt in the back. Might be hidden by carpet tho.

 

[makindust2]

You will need to flip just the bottom part of the seat forward leaving the back rest upright. Should see another set of bolt in the back. Might be hidden by carpet tho.

Thanks I will try that

 

[drakon543]

Should be farely similar to the seats i pulled out of my suburban just a shorter body you should find a few in the back corners and maybe 2 more in the center depending on your seat style.

 

[jerryjoe28]

ive had mine out, when the seat is in the down position you will want to lift the spring loaded capet panel up that moves with the back of the seats. ( you may want to remove it just to get it out of the way and make taking the seat out easier) you will see the rear brackets in each corner when the other piece is up

 

[makindust2]

I got the back seat out today, Those darn T50 torx screws are a pain. There are a total of six. Bent two sockets while getting them out.
Thanks again for all the help. I could not figure this one out