power sterring line question
- Thread starter ramfan98
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
SunlitComet
OBS Jedi-Do Good
the pressure should be a line with metal with a middle rubber section with a 180 bend on one end. the return line would be all rubber.
Last edited:
foreverfalcon40
Full Access Member
- Joined
- May 3, 2009
- Posts
- 2,082
- Reaction score
- 4
If the line is leaking, you are going to have to pull the pump b/c they are conveniently located right behing it which is a ***** to do.
Might as well replace the pump while your are at it. You are going to have to pull the pump. Feel like splurging fork an extra $40 to delete the EVO steering sensor.
I have re-done my pump 3 x. Need help I will walk you threw it.
You will need a pulley puller which you can get at local advanced auto thru their loaner tool program.
GL ff40
Might as well replace the pump while your are at it. You are going to have to pull the pump. Feel like splurging fork an extra $40 to delete the EVO steering sensor.
I have re-done my pump 3 x. Need help I will walk you threw it.
You will need a pulley puller which you can get at local advanced auto thru their loaner tool program.
GL ff40
